What are the uses of color-coated boards?

The color-coated board produced by the color-coated board manufacturer is pollution-free and economical. It is less harmful to the environment in the production process, can be recycled, and reduces environmental pollution. And it is light in weight, which can save load-bearing structural materials and reduce costs. So, what are its excellent characteristics?

The coated steel sheet is light in weight, beautiful in appearance and has good anti-corrosion performance, and can be processed directly. It provides new raw materials for the construction industry, shipbuilding industry, automobile manufacturing industry, furniture industry and electrical industry, and has good results in replacing wood with steel, efficient construction, energy saving and pollution prevention. For the color-coated steel sheet based on galvanized steel sheet, in addition to zinc protection, the organic coating on the zinc layer plays a covering and isolation role, which can prevent the steel sheet from rusting and has a longer service life than galvanized steel sheet. According to reports, the service life of coated steel sheet is 50% longer than that of galvanized steel sheet.

However, the service life of color-coated sheets with the same amount of galvanizing, the same coating and the same coating thickness will vary greatly in different regions and on different parts. For example, in industrial areas or coastal areas, due to the action of gas or salt in the air, the corrosion rate is accelerated and the service life is affected. In the rainy season, if it is soaked in rainwater for a long time, or the temperature difference between day and night is too large and easy to condense, the coating will be quickly corroded and the service life will be reduced. Buildings or factories made of color-coated steel sheets usually have a long service life under the initialization of rainwater. Otherwise, their use will be affected by the action of gas, salt and dust.

Therefore, in the design, the greater the inclination of the roof, the less likely it is to accumulate dust and other dirt, and the longer the service life; areas or parts that are not often washed by rainwater should be washed with water regularly.

With the wide application of color-coated board products, more and more products need to be transported. What problems should be paid attention to when transporting color-coated boards?

1. When loading and unloading the color-coated board, a rubber pad should be added between the paver and the product to prevent collision. If possible, special spreaders should be used.

2. The carriage of the color-coated plate transport truck should be clean, the baseplate should be covered with rubber pads or other protective devices, and necessary protective measures should be taken around the carriage to prevent packaging indentation or bruising.

3. The vertically packaged color-coated board should also be kept vertical during transportation and loading and unloading.

4. The color-coated plate should not be dragged out to prevent the burrs generated during cutting from scratching the steel plate below. The color-coated plate should be handled carefully and should not touch other hard objects.